Chargers

The Ion Cube 2S/3S Lithium Ion/Polymer Battery Charger is sold as a basic unit 3 channels, 4 channels or 5 channel deluxe model. The 3 and 4 Channel ION CUBES can be upgraded with a Graphic User Interface "Brain" (Programming and Display Card) can be installed to increase functionality. Ion Cube is the perfect tool for Pilots with the mix of Giant Scale Aircraft, Foamies, Smaller Electric Aircraft and Micro Helicopters.

Features of the BASIC ION CUBE:
* 3 Channels upgradeable to 5
* All Channels auto detect pack configuration ( 2S/3S)
* All Channels charge at 1.5 amp rate
* Charger can be upgraded with Programming Display Card at anytime by the end user
* All channels indicate end of charge

Features of the DELUXE ION CUBE:
* 3 Channels upgradeable to 5
* All Channels auto detect pack configuration ( 2S/3S)
* All Channels charge at .1 amp to 2.9 amp rate (programmable)
* All Channels display batteries voltage during charge
* All Channels display input amperage during charge
* All Channels display mah's put into packs during charge
* All channels indicate end of charge

ION3 Basic 3 Channel Lithium Ion / Lithium Polymer charger / NO GUI

Input VDC	Out put channels	Charge amps per Channel	Power source needed	Price
12	3	2.9amp to .1amp	8amp Minimum	$130.00 + Shipping

ION3 Basic 4 Channel Lithium Ion / Lithium Polymer charger / NO GUI

Input VDC	Out put channels	Charge amps per Channel	Power source needed	Price
12	4	2.9amp to .1amp	10amp Minimum	$160.00 + Shipping

ION3 Deluxe 5 Channel Lithium Ion / Lithium Polymer charger / NO GUI

Input VDC	Out put channels	Charge amps per Channel	Power source needed	Price
12	5	2.9amp to .1amp	12amp Minimum	$190.00 + Shipping

ION3 Cube charger with A123 cards installed

ION3 Basic 3 Channel Lithium Phosphate / A123 charger / NO GUI

Input VDC	Out put channels	Charge amps per Channel	Power source needed	Price
12	3	2.5 amp to .1amp	8amp Minimum	$145.00 + Shipping

ION3 Basic 4 Channel Lithium Phosphate / A123 charger / NO GUI

Input VDC

Out put channels

Charge amps per Channel

Power source needed

Price

12

4

2.5 amp to .1amp

10amp Minimum

$180.00 + shipping

ION3 Deluxe 5 Channel Lithium Phosphate / A123 charger / NO GUI

Input VDC

Out put channels

Charge amps per Channel

Power source needed

Price

12

5

2.5 amp to .1amp

12amp Minimum

$215.00 + Shipping

The Ion Cube 8.4 and 12.6 volt charging channel.

Since the Ion Cube charger uses a back plane board mounting system you can add additional channels, if yours is not fully populated. Each individually sold Ion Cube channel comes with a 24" charge leash.

Green ION Charge channel		$30 + Shipping

The Ion Cube "A123" Lithium Phosphate (LiFePO4) volt charging channel.

Since the Ion Cube charger uses a back plane board mounting system you can additional channels if you have an Ion Cube that is not fully populated with channels. Each individually sold Ion Cube channel comes with a 24" charge leash

Quick Specs.
Fits any Ion Cube Charger
Will Operate with Green channels (Lithium Ion Channels)
Charges at 2.5amps
For 2S Packs only
Will Charge A123 or LiFePO4 packs

Red Phosphate Charge channel		$35 + Shipping

GUI, (Graphic User Interface) Packaged Individually.

If you have a Ion Cube with out a GUI, purchase the GUI separately and install it your self. GUI is compatible with both the standard Ion Cube for 8.4Volt Lithium Ion/Lithium Polymer, and the New A123/Lithium Phosphate Technologies.

Graphic User Interface		$30 + Shipping

The Reliacharger Mark VI

Fromeco has brought the Reliacharger back. In attempt to make a charging solution that was more affordable, we made it Smaller, Lighter, and Slower? Following in the footsteps of its brethren, the Mark VI is extremely robust, and simple to use. In fact the Mark VI is even more simplistic than the older Reliacharger Mark I thru V.

Features
* Small 3inches x 3inches, abt. 3/4inch tall without feet
* Simple, plug in your batteries hit the "Start" button and you are charging
* Power on LED indicator
* Charge completion LED's
* Small amperage profile, channels charge at 500mA's, most smaller DC power supplies will work with this charger
* 6hr safety shut down, charger auto terminates charge after 6 hours of charging, charging resumes after you hit the
"Start" button again

Reliacharger Mark VI		$80 + Shipping

Business Hours M-F 9:00AM - 5:00PM Central Time
Phone 573-368-3600

Fax 573-368-3800

Home | About Us | On-Line Store | Portfolio | Equipment We Use | Vinyl Wraps | AeroDome Graphics | Event Calendar | Testimonials | Contact Us | Links | How to Page | Store Policies | Information Desk
AeroGraphix.biz Copyright 2005-2010 All Rights Reserved
For problems or questions regarding this web contact [webmaster]
Last updated:08/15/10

The original designs, images, logos and all artwork pictured on this website is the exclusive property of Aero Graphix and is protected by Federal Copyright Laws. Any Reproduction of designs, images, logos and all artwork similar to the one's embodied herein is expressly forbidden. Should such design, construction and selling occur, Aero Graphix is due a minimum of $500 as compensation for the time, effort in creating each individual design(s) per Federal Law 17 U.S.C. Section 101 et seq. and could be liable for statutory damages as high as $150,000 as set forth in Section 504 (c)(2) therein. Designs can be purchased for use at a one time fee set by Aero Graphix. Aero Graphix reserves the right to substitute products of like kinds and quality as it deems appropriate in the manufacturing of said displays.